OEFFAG H drawings

[ullrychsturm]

Good Day,

I am looking for detailed 3 way drawings of Banfield's OEFFAG H for a scratchbuild of the aircraft.
I have pulled every drawing and photo I can find off the internet and while Windsock Vol 23 #3 would be ideal, but I cannot find a copy anywhere.

Does anyone have detailed drawings of the aircraft?

Thank you,
Ullrych

[John McKenzie]

Try this people ...I do not accept cookies , which accounts for red writing .
There are other drawings ...you only have to look .
Took only 5 minutes to find .
JM

[ullrychsturm]

I have this, and I have found it without the embedded link. Trust me, I've looked much longer than 5 hours, let alone 5 minutes. I have already found lots of drawings and pictures, but I'm looking for something more technical, that hopefully has detail of the wing struts, empanage studs and engine detail.

[John McKenzie]

Then you should have been more specific in your 1 st ever post .
The sort of info that you seek will not so easily be found for free , on "the internet " ... there are sources still for original Austrian drawings .

[ullrychsturm]

More specific?
I thought "Windsock Vol 23 #3 would be ideal, but I cannot find a copy anywhere" would imply the level of detail I am looking for.
I am willing to pay for detailed information, but since I help fellow enthusiasts with any information I can provide for free, it is my usual default when asking for the same.

[kapitan]

Hi!
Unfortunately, only in this quality.
Best regards!

[John McKenzie]

There are sources for information , other than simply to look on the internet ... There are many books , contemporary magazines and official reports etc.,...& sometimes ex private archives are now available to research , ( sometimes in libraries for example ) ,..that may give a clue or a drawing somewhere in the pages ... it seems not many " enthusiasts " are likely to have very detailed information and "having an attitude" will not help you .
Really detail information would only be found in original drawings .

[ullrychsturm]

Thank you very much Kapitan. I will be able to print this to scale and be able to get the measurements I need for a more accurate build. I greatly appreciate that you took the time to share this with me.

[Von Banfield]

I'm sorry if I couldn't be of much help, I am usually satisfied with generic side profiles because I haven't the experience or courage to get into modelling, let alone from scratch. Good on you for doing in your first month on the forum what I haven't done during my first year.