German wheels

[mike celeskey]

Hello Folks,
I'm building a 1/3 scale halberstadt DV and I'm in need of some wheel drawings that could be used to make accurate wheels. Whatever I can get will be most helpful. The current selection of available wheels is not vast and none have the particular shapes I'm looking for. The wheels I'm looking for have a nearly flat backside and a slightly conical front with tangential spokes. However, the spokes will be faked and the wheels covered in fabric.
Any takers????
Mike

[Dan_San_Abbott]

Hi Mike:
The tire used on the Halb.D.V were 710 mm in diameter and 85 mm tire width.
The wheel diameter is 554 mm dia. rim width is 66.5mm and is 25mm deep. the hub is 160 mm long and the axle diameter is 42 mm. On the flat side of the wheel, the hub projects 10 mm out from the edge of the rim.
Blue skies,
Dan-San

[mike celeskey]

Danny-boy,
That works for me....who says a picture's worth a thousand words!!!
Mike

[Pfalz-Scout]

Originally Posted by mike celeskey

Danny-boy,
That works for me....who says a picture's worth a thousand words!!!
Mike

Mike,

nevertheless have a look on this thread:

http://www.theaerodrome.com/forum/ai...adt-cl-ii.html

However, a picture says more than a thousand words!

Best Regards
Pfalz-Scout

[mike celeskey]

perfect.................thank you!!!!!!