|
 |
|
|||||||
| Replica Aircraft Topics related to the construction of WWI replica aircraft |
 |
|
|
Thread Tools | Display Modes |
20 December 2008, 04:13 AM
|
#1 |
|
Scout Pilot
Join Date: Oct 2008
Posts: 330
 |
Snipe drawings & info required
I am looking for photocopies of the original drawings for the early type fin/rudder & top ailerons for the Sopwith Snipe as well as those for the early fuel tank "not the Badin type", can anyone help ?, Also can anyone tell me how long the tapers are for the ends of the fuselage cross members as all it says on the drawing is that they taper, but no length is given for the taper.
Cheer's. Bob... |
|
| Sponsored Links |
|
|
|
20 December 2008, 01:39 PM
|
#2 | |
|
Forum Ace
Join Date: Mar 2006
Location: Melbourne, Australia
Posts: 899
 |
Quote:
Have had no luck chasing that up either. I only have the drawings of the later fin, rudder, top aileron etc. I have drawings of the "imber" self sealing tanks but don't think any drawings of the standard fuel tank are available. Jim Kiger's "Replicraft" drawings have all the dimensions of the standard fuel and header tanks so I'm using those to base the tanks on. Cheers, Nick |
|
|
|
|
2 January 2009, 07:55 AM
|
#3 | |
|
Scout Pilot
Join Date: Oct 2008
Posts: 330
|
Quote:
Hope the drawing I sent to you arrived OK. I am going to have a look through the Salamander & Dragon drawings to see if they include the drawings that I am after for the Snipe. Cheers. Bob. |
|
|
|
|
2 January 2009, 01:08 PM
|
#4 | |
|
Forum Ace
Join Date: Mar 2006
Location: Melbourne, Australia
Posts: 899
|
Quote:
The drawing is still caught up in the Christmas mail. I'll drop you an email when it arrives. Many thanks again. Cheers, Nick |
|
|
|
|
| Bookmarks |
«
Previous Thread
|
Next Thread
»
Linear Mode
|
|
As an Amazon Associate we earn from qualifying purchases.
All times are GMT -7. The time now is 03:52 PM.