Conact Resine 1/24 New Product Announcement

[mgtaylor]

ON the EVE of the NAt's Comes a BRAND NEW PRODUCT ANNOUCEMENT BY CONTACT RESINE !!

The Follow on Kit for the Classic Early War 1/24th Scale Limited Run Hansa-BrandenBurg D.I

Resurected from the Ashes CONTACT RESINE has been down but NOT OUT. During it's Hiatis it has Finally Finished the Creation of a Brand NEW 1/24 Scale Limited Run Resin KIT.

THE FAMOUS British SOPWITH CAMEL & Seperate Clerget Engine w/Stand



The Engine is avaialble seperately as a stand alone display for $35.00

THE LIMITED RUN KIT IS only $150.00 Which Includes A Complete Resin Interior & rarely Depicted Weapon System Detail. This is an Introductry Price for those that wish to be the first to get one for their collection befor the production run Runs out and the price of the Kits goes up

ALL SPADA SOpwith Camel Decal Profiles are available for Order in 1/24 Scael As well. Includung the last two latest Sopwith Releases RNAS Camels and Foreign Camels

This IS SO New I havent even had a chance to Update WWI COLOR W.W.I ACFT COLOR BOth Kits Are Avaialble for Order NOW. Just email me mgtaylor2000@aol.com

[mgtaylor]

AVAIL AS A SEPERATE SUB Assembly Kit is the 1/24 Scale Clerget Rotory Engine with a Dispaly Stand $35.00 US

[mgtaylor]

As a Reminder THIS was Contact Resines FIRST Premier WWI 1/24 Scale Relase NOW OOP






Yours Mikey

[bobs_buckles]

Mike,
Looks like a beauty and no mistake.
Cheers for the info.

Bob

[mgtaylor]

Dear Bobby THANKS !!!!

Great Minds think a like... I think it is a Winner too. even though there are kits and kits of the Camel I think this one like the HBD.I Built right Like the HBDI above, I think that the One Off Scale actully works for this series. 1/24 Normally Excusively Reserved for Car Models and Some Very Popular WWII Fighters is a Break though for WWI Modelling such as teh Airifx Series which is a break though for Detail. I think the Same Level of Large Scale Detail works here as well in these kits.

The Fact NO regular manufactuer has ever (or will surely never) release a 1/24 issue makes it obvious to the observer that these Kits are Unquie. Done Right I think They truely build themsleves out to a Beautiful Desk Size Dispaly SURE to Please ANY Collector type. NOt ot mention the WIde range of Profiles availble from SPADA's Custom printed Decals. Being a Limited Run you are sure to have a Special Model.

Yours Mike

[Guerrero]

Hi Mike

So.....what did you think about this engine ?

I have built this one very quickly without problems.

I'm now working on Gnome Rhone..... and other surprised.

Friendly

Marc

[ChrisSavaglio]

Mike and Marc,
Glad to hear you guys are releasing another. I'm also glad it's a bit more conventional without the wood wings and tail.

BTW, the HD.1 Mike posted was mine. It was a long build, but definately a lot of fun.

Chris

[Guerrero]

Hi Chris

I think to make the wing for the Hansa in resin.

Like that the kit will be more "conventional" and the price low.

I'm working on a Nieuport 17 1/24 scale and I think to make another kits in resin in 1/32 scale.

I would like to make an Airco DH 2 and a Hansa W29.

I have all the documentation to make the masters.

You can propose me a list of models for the 1/24 scale and 1/32 scale too.

Yours

Marc

[Bfmarcus]

....Spada will propose all decals you need for these aricrafts ..... "M,M,M & M" a winner combination to remember (Marc, Michel, Mike & Marc ....) Lol

[ChrisSavaglio]

Marc,
I'm glad to hear from you and that you haven't disappeared. I hope all is well out there.

The DH-2 would be really great to see in large scale, either 1/24 or 1/32.

I think a Fokker triplane in 1/24 would be a good seller, but I like the more unusual stuff....one of the reasons I really enjoyed the Hansa.

I know a lot of folks would love to see a two seater...maybe a Lloyd or a Roland. Any float plane or flying boat would be really great to see as well.

I think anything you decide to come out with would be a welcome edition to anyone's collection.

Please keep up the great work.

Chris