1/48 Blue Max Sopwith 7.F-1 "Snipe"
 

Hi everyone,

Just thought I would share some progress pics of the project I have just started - the 1/48 scale Blue Max Sopwith 7F-1 Snipe (there is plenty of history around on this aircraft so I won't go into it here). I plan to build this as a 4SQN Australian Flying Corps aircraft (yes I am feeling a little patriotic after building all that German stuff!) The kit is limited run, and is one of three Snipe kits in this scale (the others being the CSM resin offering and the Hi-Tech kit, also limited run). Being a Blue Max kit (ie nice fine details but nothing really fits), I am in for a fun time.

I have not done too much to date, however, I started with the upper fuselage decking. Dry-fitting revealed that it sat too high and was too wide, so I sanded the deck until it sat properly at the right height. Looking at photos and drawings in the datafile, it quickly became ovious to me that Blue Max got the shape of the cockpit opening rather wrong. The opening needed to be extended forward, noting the assymetry between sides (the required adjustments are marked in blue - of note, taking a look at sprue shots, Hi-Tech got the cockpit opening wrong as well, and I am not so sure on the CSM shape).

http://i23.photobucket.com/albums/b3...an/Snipe01.jpg

I thusly modified the kit cockpit opening and thinned the thick plastic to a more realistic thickness. Whilst I was on the decking, I made a few more corrections. The hand hold behind the cockpit is moulded as a round dimple, where photos clearly show a smaller rectangular opening with rounded ends. I filled the dimple then cut a new handhold. I also added the panel lines where the plywood section of the decking finishes and the metal part starts. Other additions included the windshield stand, bulkhead behind the cockpit opening, and the raised lip around the bottom sides of the decking (a feature prominent in photos).

http://i23.photobucket.com/albums/b3...an/Snipe04.jpghttp://i23.photobucket.com/albums/b3...an/Snipe05.jpg

Next I moved to the cockpit itself. The enlarged cockpit opening, plus the "open" centre wing section, meant that I couldn't get away with anything too simple. The kit cockpit is simple and predominantly white metal, and it quickly became apparent to me that it wouldn't fit. A such, I decided to largely scratch build the cockpit. After thinning out the sides a little, I built up the cockpit framing from strip and sheet styrene (plus some heat stretched styrene for the stringers), making sure to check that it fit. I did have to taper the frame towards the lower part of the cockpit due to the indents for the wing attachments, however, when in place with the decking on it is surprisingly difficult to tell that it is tapered.

http://i23.photobucket.com/albums/b3...an/Snipe02.jpghttp://i23.photobucket.com/albums/b3...an/Snipe03.jpg

Here it is all closed up to make sure it fits (no doubt something will happen as I built it up that will take it all out of level!!)

http://i23.photobucket.com/albums/b3...an/Snipe06.jpg
http://i23.photobucket.com/albums/b3...an/Snipe07.jpghttp://i23.photobucket.com/albums/b3...an/Snipe08.jpg

Next I will tackle some painting and cockpit detailing.

All comments and feedack welcome.

BC

Great work Brad!
 

I am a fan of your work Brad. I have seen it on the intranet and here on the Aerodrome. It is fantastic to see so many modellers with such an attention to detail, and I can never work out why kit manufacturers get things wrong so often! Cheers mate, David.

Brad,
Nice crisp work so far.
I'm looking forward to this one.

Cheers,
Bob ;)

Great to see you doing this one, Brad!

I'm really lloking forward to seeing this develop - your builds are always a treat. I have one of these started, but waiting for current projects to get done so your timing is excellent!

I love Blue Max kits, a chance to do some nice chopping and scratch-building. The shapes are usually pretty good and the surface detailing some of the best. Fit is another issue, as well as thickness of plastic - particularly aerofoils - which usually means losing the underside detail on wings, as a minimum, but theyre always a satisfying challenge!

Bonne chance et bon courage!

Even if you left it with the work you have done so far, still it would be an excelent model.
Congratulations Brad, it is always a pleasure for me to watch your work, keep on the good job my friend.
I realy admire your modeling skils.:goggles::goggles::goggles:

sweet i am going to love this thead. Looks Great but you dont need me to tell you that

another of your threads that I'll be watching closely. I can't wait to see the first dabs of paint that you'll be adding, because what sets your models apart are your fantastic painting skills. I especially love how you paint your cockpits and engines. I've just had a look at all the models you posted here and was impressed by how consistent the quality of your models is.
I now model in 3D but if I still made plastic kits, your models would be a great inspiration. :goggles:

Brad, as always your work is fantastic. A true master modeler. Thanks for sharing your skill with us, we all love following your progress. Cheers!

Jeff